Luminaire Accessories
Lumistar Timer LED Internal
- Single press on/off push-button functionality
- Dimmer adjusts brightness with prolonged button press
- Brightness setting auto-saves, light flashes at min/max brightness
- Factory-activated timer, switches light off after set duration
- Dimmer use during timer restarts countdown upon release
- Timer cancellation possible with second button press
- Timer deactivation/activation via button press and power toggle
- Light flash signals timer status: once for off, twice for on
WANT MORE TECHNICAL DETAILS? DOWNLOAD OUR DATASHEET.
INTERESTED OR HAVE QUESTIONS? GET IN TOUCH WITH US NOW!
Lumistar Timer
- Designed for Lumistar luminaires
- Retrofitting option available
- Permanent operation switch optional
- Time settings 0.1 seconds to 20 hours
- IP 65 protection class
- 16 A 250 V AC switching capacity
- Cable entry for 7-13 mm diameter
- Application temperature -10 to +50°C
- Versions: stainless steel or plastic housing
WANT MORE TECHNICAL DETAILS? DOWNLOAD OUR DATASHEET.
INTERESTED OR HAVE QUESTIONS? GET IN TOUCH WITH US NOW!
Lumistar Lumistrob LS 55-LED
- Designed for Lumistar luminaires
- Epilepsy seizure warning
- Avoid direct LED exposure
- Adjustable flash speed
- IP 65 protection class
- 24 V AC/DC, 120-230 V AC operating voltage
- 1-110 Hz flash frequency
- Multiple mounting options
- Compatible with METAGLAS®, BioControl range
- Stainless steel or aluminum body options
WANT MORE TECHNICAL DETAILS? DOWNLOAD OUR DATASHEET.
INTERESTED OR HAVE QUESTIONS? GET IN TOUCH WITH US NOW!
Lumistar Timer for Ex hazardous areas, external
- Suitable for external Ex hazardous areas
- Timer/flash relay functions
- Zones 1, 2, 21, 22 approved
- Ambient temperatures: -20°C to +40°C
- Time setting 10 sec to 60 min
- Flashing sequence customizable
- Reprogramming by manufacturer only
- Variants: 230-240V, 115-120V, 24V
- Explosion group IIC, temperature T6
- IP66 protection, polyester resin housing
WANT MORE TECHNICAL DETAILS? DOWNLOAD OUR DATASHEET.
INTERESTED OR HAVE QUESTIONS? GET IN TOUCH WITH US NOW!
Lumistar Timer for Ex hazardous, Non Ex areas, Internal
- Direct or indirect switch-on, auto-off after ~5 mins
- For temporary, short-term container interior illumination
- Extends Lumistar luminaire lamp life, lowers temperature
- Compact, fits most Lumistar luminaires (175 to 225, USL 06 onwards)
- Suitable for Ex and Non Ex areas (USL 06-Ex onwards)
- Retrofitting available at manufacturer’s works
- Two operating functions: remote and direct control
- Operating voltage options: 12 V, 24 V, 120 V, 230 V
- Power capacity: up to 50 W (12 V), 100 W (other voltages)
WANT MORE TECHNICAL DETAILS? DOWNLOAD OUR DATASHEET.
INTERESTED OR HAVE QUESTIONS? GET IN TOUCH WITH US NOW!
Lumistar External Push Button For Ex Area
- External push-button for Ex-areas
- Time-independent control or time module activation
- Double-sided or single-sided setup options
- Mounted within 5m of luminaire
- Power via luminaire terminals
- Nominal voltages: 24 V, 110-240 V
- Versions: push-button/push-button, push-button/switch
- IP66 protection, polyester resin casing
- Ambient temperature range: -20°C to +40°C
- M20×1.5 cable gland for 6-13 mm cable diameter
WANT MORE TECHNICAL DETAILS? DOWNLOAD OUR DATASHEET.
INTERESTED OR HAVE QUESTIONS? GET IN TOUCH WITH US NOW!
Lumiglas Signalling Device M55-BD-Ex
- Auto switch-on/off in Ex indoor/outdoor areas
- Radar/optical sensors for motion/twilight detection
- Energy-saving operation
- Stainless steel body: 1.4404
- IP 65 and IP 67 protection class
- Ambient temperatures: -20°C to +40°C
- 230 V AC or 24 V AC/DC operating voltage
- Hinged bracket for mounting, stainless steel 1.4301
- Potentiometer-adjustable signalling and twilight sensor range
- Potential-free contact for control unit signal generation
WANT MORE TECHNICAL DETAILS? DOWNLOAD OUR DATASHEET.
INTERESTED OR HAVE QUESTIONS? GET IN TOUCH WITH US NOW!