+61 2 9669 4000
Unit 19, 77 Bourke Road, Alexandria, NSW 2015 AUSTRALIA

Kito End of Line Deflagration – Endurance Burn Flame Arresters

End of Line Deflagration Endurance Burn Flame Arresters For Atmospheric Deflagrations

Kito Endurance burn flame arresters provide enhanced safety compared to “short-time burn-proof” flame arresters for atmospheric deflagrations.

Beh 4,5 Iia K04
Beh 4,5 Iib1 A02
Aeh 4,5 Iia 02
Beh 3 Iib102

Depending on your risk assessment and your insurer’s requirements, an endurance burn, end-of-line flame arrester instead of a “short-time” burn-proof flame arrester may be needed.

Deflagration and endurance burning proof ventilation hood

KITO® BEH-4-IIA-…-K or -A & KITO® BEH-5-IIA-…-K or -A

As breather/venting safety device incorporating an explosion and endurance burning flame arrester element for installation on top of storage tanks, tank access covers or breather lines. The breather allows the unimpeded flow of gases out to atmosphere and air into the tank/pipe thereby preventing vacuum locks whilst ensuring provision of a permanent and reliable protection against any flashback into the tank/pipe.

This device is not permitted to be installed in enclosed areas.

Approved for all materials of the explosion group IIA with a maximum experimental safe gap (MESG) > 0.9.

Beh 4,5 Iia K02

INTERESTED OR HAVE QUESTIONS? GET IN TOUCH WITH US NOW!

KITO® BEH-4-IIB1-…-K Or -A & KITO® BEH-5-IIB1-…-K Or -A

Beh 4,5 Iia K04

Deflagration and endurance burning proof venting hood for methanol, ethanol and 2-propanol under certain conditions of use.

The minimum flow rates for outbreathing are given in the installation, operating and maintenance instructions (IOM).

Also suitable as deflagration proof venting hood at tanks for flammable media of explosion group IIB1 with a maximum experimental safe gap (MESG) ≥ 0.85 mm.

INTERESTED OR HAVE QUESTIONS? GET IN TOUCH WITH US NOW!

KITO® AEH-4-IIA-… & KITO® AEH-5-IIA-…

As breather/venting safety device incorporating an explosion and endurance burning flame arrester element for installation on top of storage tanks, tank access covers or breather lines.

The breather allows the unimpeded flow of gases out to atmosphere and air into the tank/pipe thereby preventing vacuum locks whilst ensuring provision of a permanent and reliable protection against any flashback into the tank/pipe.

This device is not permitted to be installed in enclosed areas.

Approved for all materials of the explosion group IIA with a maximum experimental safe gap (MESG) > 0.9.

Aeh 4,5 Iia 02

INTERESTED OR HAVE QUESTIONS? GET IN TOUCH WITH US NOW!

KITO® BEH-3-…-IIB1

Beh 3 Iib102

As an end-of-line flame arrester to protect vent openings of storage tanks. Explosion and endurance burning proof for all inflammable liquids and vapours of explosion group IIB1 and also for alcohols. This device is not permitted to be installed in enclosed areas.

Installation on top of storage tanks, tank access covers or breather pipelines. The flame arrester protects a tank against flashbacks but allows the flow of gases out into the atmosphere and air into the tank.

INTERESTED OR HAVE QUESTIONS? GET IN TOUCH WITH US NOW!

KITO® BEH/M-IIA-…-K & KITO® BEH/M-IIA-…-A

As breather/venting safety device incorporating an explosion and endurance burning flame arrester for installation on storage tanks containing particular categories of inflammable liquids providing for reliable and safe operation whilst ensuring protection against any possible flashback.

Approved for all materials of the explosion group IIA with a maximum experimental safe gap (MESG) > 0.9.

Beh M Iia K A02

INTERESTED OR HAVE QUESTIONS? GET IN TOUCH WITH US NOW!

KITO® BEH/M-IIB1-…

Kito® Behm Iib1

As an end-of-line flame arrester element to protect vent openings of storage tanks. Explosion and endurance burning proof for all inflammable liquids and vapours of explosion group IIB1 and also for alcohols. This device is not permitted to be installed in enclosed areas.

Installation on top of storage tanks, tank access covers or breather pipes. The flame arrester protects a tank against flashbacks but allows the flow of gases out into the atmosphere and air into the tank.

INTERESTED OR HAVE QUESTIONS? GET IN TOUCH WITH US NOW!

Condensate Drain Flame Arrester – End-of-line Deflagration Flame Arrester Endurance Burning Proof

KITO® SK/K-IIA & KITO® SK/K-IIB1

Fittings for screwing in armature housings, of endurance-burn proof pressure valves and combined PV valves for all inflammable liquids and vapours of explosion group IIA with MESG >0.9 mm and explosion group IIB1 with MESG ≥ 0.85 mm.

The condensate drain device enables draining of the condensate inside the housing to the outside and prevents flames from entering the valves.

Sk,k Iia 02

INTERESTED OR HAVE QUESTIONS? GET IN TOUCH WITH US NOW!