DELTA m microtuf® MODEL FS42CS Mass Flow Switch

Inquire

DELTA m microtuf® II MODEL LS1100 Liquid Level Switch

• Switch on level change of .03 inch without concern for changing temp, density, dielectric constant or chemical composition.
• Wide operating temperature range -100°F to +390°F (-70°C to +200°C).
• Wide flow range of .01 to 5 feet per second (fps) in oil, 2.5 fps in water and .1 to 500 fps in gases.
• Two year workmanship warranty.
• Free of all moving parts that can stick, coat or fail.
• New smaller and simpler packaging.

Inquire

DELTA m microtuf® II MODEL FS2100 Mass Flow Switch

• Mass Flow Switch for the detection of the mass flow rate of liquids and gases.
• Wide operating temperature range -100°F to +390°F (-70°C to +200°C).
• Wide flow range of .01 to 5 feet per second (fps) in oil, 2.5 fps in water and .1 to 500 fps in gases.
• Two year workmanship warranty.
• Free of all moving parts that can stick, coat or fail.
• New smaller and simpler packaging.

Inquire

DELTA m VERSA-SWITCH® – MODEL FS51SC Single Channel Mass Flow Switch

• Simple, field configurable Mass Flow Switch for the detection of the mass flow rate of liquids and gases with time delay adjustable from 0 to 300 seconds.
• Field selectable operating power 110VAC, 220VAC, or 24VDC.
• Wide operating temperature range -100°F to +850°F (-70°C to +458°C).
• Wide operating flow range of .01 to 5 feet per second (fps) in oil, 2.5 fps in water and .1 to 500 fps in gases.
• Removable, plug in electronics.
• Free of all moving parts that can stick, coat or fail.
• Fast response time of .5 to 10 seconds depending on the media.
• Self heating sensor design improves repeatability. No separate heater to fail or slow response time.
• Two Year Workmanship Warranty

Inquire

DELTA m VERSA-SWITCH® – MODEL LS51SC Single Channel Point Level Switch

• Simple field configurable thermal point level switch for the detection of liquid level in all vessels.
• Wide operating temperature range -100°F to +850°F (-70°C to +458°C).
• Field selectable operating power 110VAC, 220VAC, or 24VDC, 24VAC.
• Switch on level change of .03 inch without concern for changing temperature, density, dielectric constant or chemical composition.
• Removable, plug in electronics.
• Free of all moving parts that can stick, coat, or fail.
• Fast response time of .1 to 1 second on wetting, media dependent.
• Self heating sensor design improves repeatability. No separate heater to fail or slow response time.
• Two Year Workmanship Warranty.

Inquire

DELTA m VERSA-SWITCH® – VS5100 Mass Flow – Level – Temperature

• Simple field adjustable switch for mass flow, level, and/or temperature of liquids or gasses with time delay adjustable from 0 to 300 sec.
• Wide operating temperature range -100°F to +850°F (-70°C to +458°C).
• User configurable operating power 110VAC, 220VAC, or 24VDC.
• Removable, plug in electronics.
• Can be configured with 2 independent outputs, such as level or mass flow with temperature or two mass flow rates.
• Level response time of .1 to 1 second on wetting, media dependent
• Flow response time of .5 to 10 seconds, media dependent
• Can be used for either gas or liquid applications including interface detection.
• Self heating sensor design improves repeatability. No separate heater to fail or slow response time.
• Two Year Workmanship Warranty

Inquire

DELTA m Low Flow Sensor (LFS) Option

Reach liquid flow rates 14X below standard sensor flow ranges and 1.5X lower vs. gas sensor ranges

• Flows down to 0.33ccm (liquid) & 30ccm (Gas)
• 1/4 inch FNPT or optional compression fittings
• Low internal volume for very short sample times
• Developed for low flow applications where reliability and durability are mandatory

Inquire