Celebrating 27 Years 1999-2026
CMC Technologies supplies our IEP-Brilex explosion vent accessories, including integrated gaskets, insulation, mounting frames, ATEX Zone 22 burst sensors and cables for industrial, food and high-temperature applications.
Explosion Vent Accessories
IEP-Brilex Integrated Explosion Vent Gaskets
All explosion vents are supplied with “factory-installed” integrated flange gaskets. The standard material is EPDM and can be used from -40 °C to +120 °C.
- As an alternative the following standard materials are available:
- White FDA Silicone: – 50 °C to +200 °C
- Klinger: – 100 °C to +400 °C
- Ceramic: -100°C to +500 °C
- Other materials can be supplied on request.
IEP-Brilex Insulation for Explosion Vents
Insulation consists of fire-proof mineral wool according to DIN 1259. The insulation is directly mounted to the “vent-side” of the explosion vent and is protected by a lightweight aluminium cover with a water-tight seal. It is secured to the explosion vent to prevent it from flying away during venting. IEP-Brilex insulation does not have any effect on the venting relief capability or venting efficiency and is available in thicknesses of 40mm,60,,80mm, and 100mm. This has been proved by notified bodies in many dynamic explosion tests. Optional insulation thickness and alternate metal cover materials can be supplied to meet the customer’s specifications.
IEP-Brilex Mounting Frames
The necessary outlet flange for types GE / KE can also be supplied. The following material is available:
- Zinc plated carbon steel
- Stainless steel.
IEP-Brilex Burst Sensor – SE – For ATEX Zone 22 (Discontinued Model, Please Refer to SE-HT Sensor and Sensor Wire)
To monitor an installation, a burst sensor type SE can be installed. The sensor signals the opening of the bursting disc so that equipment such as fans or rotary valves can be switched off. SE sensors are installed separately and just above the explosion vent. This enables SE sensors to be easily adapted to existing installations.They are also suitable for the food industry.
IEP-Brilex Burst Sensor – SE-HT (High Temperature Sensor) – for ATEX Zone 22
To monitor an installation, a burst sensor type SE can be installed. The sensor signals the opening of the bursting disc so that equipment such as fans or rotary valves can be switched off. This SE sensor is complemented by the HT sensor, which is also suitable for use at high temperatures.
SE HT Sensor cable or SE sensor wire is also available to purchase as an accessory from CMC Technologies.
WANT MORE TECHNICAL DETAILS? DOWNLOAD OUR DATASHEET.